Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 392

Table 138. Commands related to ruckus(config-zone-ap-group)
Syntax and Type
ruckus(config-zone-ap-group)#
override-channel-select-mode
Type: Privileged
ruckus(config-zone-ap-group)#
override-client-admission-control
Type: Privileged
ruckus(config-zone-ap-group)#
override-lbs
Type: Privileged
ruckus(config-zone-ap-group)#
override-venue-code
Type: Privileged
ruckus(config-zone-ap-group)#
override-zone-location
Type: Privileged
ruckus(config-zone-ap-group)#
override-zone-location-additional-
info
Type: Privileged
ruckus(config-zone-ap-group)#
poe-operating-mode
Type: Privileged
ruckus(config-zone-ap-group)#
poe-out
Type: Privileged
ruckus(config-zone-ap-group)#
port-setting
Type: Privileged
ruckus(config-zone-ap-group)#
radio-band
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
2.4g
5g
2.4g
5g
<ap-model>: AP model
name
<ap-model> [ enable |
disable ]
<ap-model>
<ap-model> [ 2.4g | 5g ] Switches the radio band for a
Configuration Commands (s - z)
Description
Overrides auto channel selection
mode and ChannelFly MTBC.
Overrides the client admission
control settings.
Overrides the location based
service to zone settings.
Overrides the venue code.
Overrides the zone location
setting.
Overrides the zone location
additional information setting
Switch the PoE Operating Mode
for a specific AP model.
Sets the PoE out port for a specific
AP model.
Sets the port settings for specific
AP model.
specific AP model.
zone
392