Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 400

Table 144
Table 144. Commands related to ruckus(config-zone-ap-registration-rule)
Syntax and Type
ruckus(config-zone-ap-
registration-rule)# description
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# do
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# end
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# exit
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# gps
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# help
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# ip-range
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# provision-tag
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# subnet
Type: Privileged
ruckus(config-zone-ap-
registration-rule)# type
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
lists the related zone-ap-registration-rule configuration commands.
Parameters (if any)
<text>
<latitude> <longitude>
<distance>
<ip> <ip>
<tag>
<ip> <mask>
[ gps | provision-tag | ip-
range | subnet ]
Configuration Commands (s - z)
Description
Sets the description.
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Sets the GPS coordinates.
Displays the help.
Sets the IP address range from and
to IP address.
Sets the provision tags.
Sets the subnet IP address and
subnet mask.
Sets the rule type.
zone
400