Show Ap-Stats - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

show ap-stats

To display the AP statistics, use the following command:
ruckus# show ap-stats
Syntax Description
This command uses the following syntax:
<mac> type [data-throughput | client-count | client-association ] ap period [ 30-
d | 8-h | 24-h | 7-d ]
<mac>: AP MAC address
type: Statistics data type
data-throughput: Data throughput
client-count: Client count
client-association: Client associations
ap: Per AP
period: Statistics period
30-d: 30 days
8-h: 8 hours
24-h: 24 hours
7-d: 7 days
<mac> type [ data-throughput | client-association | client-count ] radio [ 2.4g |
5g ] period [ 8-h | 30-d | 7-d | 24-h ]
<mac>: AP MAC address
type: Statistics data type
data-throughput: Data throughput
client-association: Client associations
client-count: Client count
radio: Per Radio
2.4g: 2.4 GHz radio
5g: 5 GHz radio
period: Statistics period
8-h: 8 hours
30-d: 30 days
7-d: 7 days
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Show Commands
show ap-stats
478