Show Cls-Sess-Range - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

Example
ruckus# show cls-sess msisdn 123456789012345

show cls-sess-range

To display the session details of a user equipment created on or after the specified
time at a node level, use the following command:
ruckus# show cls-sess-range < sess establishment timestamp> <number
of sessions>
Syntax Description
This command uses the following syntax:
<sess establishment timestamp>: Timestamp on session establishment in the
format hh/mm/ss. For example: 23/06/30
<number of sessions>>: Indicates the number of connected sessions to the
controller
Default
This command has no default settings.
Command Mode
Privileged
Example
ruckus# show cls-sess-range 230450 1
show cluster
To display the system cluster settings, use the following command:
ruckus# show cluster
Syntax Description
This command uses the following syntax:
<name>: Name of the cluster
<ip-list>: Cluster node IP list
Default
This command has no default settings.
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Show Commands
show cls-sess-range
488