Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 105

Table 36. Commands related to ruckus(config-domain-3rd-zone-wlan)
Syntax and Type
ruckus(config-domain-3rd-zone-
wlan)# auth-service-profile
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# auth-type
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# bypass-cna
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# core-network
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# do
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# end
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# exit
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# forwarding-service-profile
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# help
Type: Privileged
ruckus(config-domain-3rd-zone-
wlan)# hotspot-profile
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<name>
[ ttg-pdg | bridge ]
<name>
<name>
Configuration Commands (a - d)
Description
Sets the authentication service
profile.
Sets the authentication service
type.
Enables bypass CNA.
Sets the core network.
Executes the do command.
Ends the current configuration
session and returns to the
privileged EXEC mode.
Exits from the EXEC.
Sets the core network forwarding
service profile.
Displays the help.
Sets the hotspot service.
domain
105