Diagnostic - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

Related Commands
Table 172
Table 172. Commands related to ruckus(debug-data-plane)
Syntax and Type
ruckus(debug-data-plane)# do
Type: Privileged
ruckus(debug-data-plane)# end
Type: Privileged
ruckus(debug-data-plane)# exit
Type: Privileged
ruckus(debug-data-plane)# help
Type: Privileged
ruckus(debug-data-plane)# run
Type: Privileged

diagnostic

To run debug diagnostic script management, use the following command:
ruckus(debug)# diagnostic
Syntax Description
This command has no arguments or keywords.
Default
This command has no default settings.
Command Mode
Debug
Example
ruckus(debug)# diagnostic
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
lists the related debug data-plane commands.
Parameters (if any)
<dp commands> For
example datacore
dump_ifs
Debug Commands
Description
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Executes dataplane commands.
diagnostic
450