License Export - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

license export

To export licenses, use the following command.
ruckus(config)# license export <ftp-url><name>
Syntax Description
This command uses the following syntax:
ftp-url: License file. FTP URL format is, ftp://<username>:<password>@<ip>/
<file-path>
name: Set Control Plane
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# license export ftp://mahan:ruckus1!@172.19.7.100
license import
To setup the import licenses, use the following command.
ruckus(config)# license import <ftp-url>
Syntax Description
This command uses the following syntax:
ftp-url: License file. FTP URL format is, ftp://<username>:<password>@<ip>/
<file-path>
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# license import ftp://mahan:ruckus1!@172.19.7.100
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Configuration Commands (e - r)
license export
255