Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 251

Related Commands
Table 97 lists the related lbs-service configuration command.
.
Table 97. Commands related to ruckus(config-lbs-service).
Syntax and Type
ruckus(config-lbs-service)# do
Type: Privileged
ruckus(config-lbs-service)# end
Type: Privileged
ruckus(config-lbs-service)# exit
Type: Privileged
ruckus(config-lbs-service)# help
Type: Privileged
ruckus(config-lbs-service)# host
Type: Privileged
ruckus(config-lbs-service)#
password
Type: Privileged
ruckus(config-lbs-service)# port
Type: Privileged
ruckus(config-lbs-service)# venue
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Parameters (if any)
<IP address> <domain
name>
<password>
<port>
<venue>
Configuration Commands (e - r)
Description
Sets the do command.
Ends the current configuration
session and returns to the
privileged EXEC mode.
Exits from the EXEC.
Displays the help message.
Sets the server address.
Sets the password.
Sets the port number.
Sets the LBS venue.
lbs-service
251