No Dns-Server-Service - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

no dns-server-service

To disable the DNS server service, use the following command.
ruckus(config)# no dns-server-service <name>
Syntax Description
This command uses the following syntax:
name: DNS server service name
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# no dns-server-service SN1
no domain
To delete management domains or access point zones in a specific domain
configuration, use the following command.
ruckus(config)# no domain
Syntax Description
This command uses the following syntax:
<name> zone <name>
<name>: Domain name
zone: Deletes AP zones of a specific domain
<name>: AP zone name
<name> zone <name> ap <ap-mac>
<name>: Domain name
zone: Deletes AP zones of a specific domain
<name>: AP zone name
ap: Deletes an AP of a specific AP zone
<ap-mac>: AP MAC address
<name> zone <name> wlan <name>
<name>: Domain name
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Configuration Commands (e - r)
no dns-server-service
281