Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 154

Table 57. Commands related to ruckus(config-domain-zone-hotspot20-wlan-profile)
Syntax and Type
ruckus(config--domain-zone-
hotspot20-wlan-profile)# connect-
capabilities
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
[ pptp | http | voip-6 |
ipsec-vpn | ikev2 | ftp | tls
| voip-17 | icmp | ssh | esp
] [ open | unknown |
closed ]
Configuration Commands (a - d)
Description
Sets the connection capabilities.
pptp: Protocol Number:6
Port:1723 Protocol Name: Used
by PPTP VPNs
http: Protocol Number:6 Port:80
Protocol Name: HTTP
voip-6: Protocol Number:6
Port:5060 Protocol Name: VoIP
ipsec-vpn: Protocol Number:17
Port:4500 Protocol Name: IPSec
VPN
ikev2: Protocol Number:17
Port:500 Protocol Name: Used by
IKEv2(IPSec VPN)
tls: Protocol Number:6 Port:443
Protocol Name: Used by TLS VPN
voip-17: Protocol Number:17
Port:5060 Protocol Name: Voip
icmp: Protocol Number:1 Port:0
Protocol Name: ICMP
..................................continued
domain
154