Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 44

Table 10. Commands related to ruckus(config-admin-radius)
Syntax and Type
ruckus(config-admin-radius)# ip
Type: Privileged
ruckus(config-admin-radius)#
name
Type: Privileged
ruckus(config-admin-radius)# no
Type: Privileged
ruckus(config-admin-radius)# port
Type: Privileged
ruckus(config-admin-radius)#
realm
Type: Privileged
ruckus(config-admin-radius)#
service
Type: Privileged
ruckus(config-admin-radius)#
shared-secret
Type: Privileged
ruckus(config-admin-radius)# test
Type: Privileged
ruckus(config-admin-radius)# type
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<ip>
<name>
backup
<port>
<realms> Multiple realms
supported. Use a comma
(,) to separate realms
(example:home1,home2)
<services>: Multiple
services supported. Use a
comma (,) to separate
services
(example:home1,home2)
<shared-secret> Shared
secret between 1 and
255.
<username> <password>
[PAP | CHAP]
[ radius | tacacs ]]
Configuration Commands (a - d)
Description
Sets the IP addresses of the
primary RADIUS server.
Sets the RADIUS server name.
Disables the command.
Sets the port addresses of the
primary RADIUS server.
Sets the realms.
Sets the services.
Sets the shared secret of the
primary RADIUS server.
Tests the RADIUS server based on
the user credentials and protocol
settings.
Sets the admin authentication
type,
admin-radius
44