Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 532

wlan-template: Shows the WLAN template configurations
<name>: WLAN template name
guest-access: Shows the guest access configurations
<name>: Guest access name
wlan-template <name> device-policy <name>
wlan-template: Shows the WLAN template configurations
<name>: WLAN template name
device-policy: Shows the device policy
<name>: Device Policy name
wlan-template <name> l2-acl <name>
wlan-template: Shows WLAN template configurations
<name>: WLAN Template name
l2-acl: Shows the Layer 2 Access Control List (ACL)
<name>: Layer 2 Access Control name
wlan-template <name> web-authentication <name>
wlan-template: Shows the WLAN template configurations
<name>: WLAN template name
web-authentication: Shows the web authentication configurations
<name>: Web authentication name
control-plane <name>
control-plane: Shows the control plane configurations
<name>: Control plane name
control-plane <name> IP route static
control-plane: Shows the control plane configurations
<name>: Control Plane name
ip: Show Control plane IP configurations
route: Shows the control plane routing configurations
static: Shows the static routes
control-plane <name> interface user-defined <name>
control-plane: Shows the control plane configurations
<name>: Control plane name
interface: Shows the interface configurations
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Show Commands
show running-config
532