Mgmt-Acl - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

mgmt-acl

To create or update the management interface access control list configuration, use
the following command.
ruckus(config)# mgmt-acl
Syntax Description
This command has no arguments or keywords.
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# mgmt-acl
Related Commands
• Table 101
• Table 102
Table 101
.
Table 101. Commands related to ruckus( config-mgmt-acl) ).
Syntax and Type
ruckus(config-mgmt-acl)# do
Type: Privileged
ruckus(config-mgmt-acl)# enable
Type: Privileged
ruckus(config-mgmt-acl)# end
Type: Privileged
ruckus(config-mgmt-acl)# exit
Type: Privileged
ruckus(config-mgmt-acl)# help
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
lists the related mgmt-acl server configuration commands.
lists the related mgmt-acl-rule configuration commands.
lists the related mgmt-acl server configuration commands.
Parameters (if any)
Configuration Commands (e - r)
Description
Executes the do command.
Enables the access control of the
management interface.
Ends the current configuration
session and return to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
mgmt-acl
263