Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 402

Table 146. Commands related to ruckus(config-zone-ap-snmp-options-snmp-v2-community
configuration)
Syntax and Type
zone-ap-snmp-
ruckus(config-
options-snmp-v2-community)#
notification-type
Type: Privileged
ruckus(config -zone-ap-snmp-
options-snmp-v2-community )#
read
Type: Privileged
-zone-ap-snmp-
ruckus(config
options-snmp-v2-community)#
write
Type: Privileged
Table 147
tion commands.
Table 147. Commands related to ruckus(config-zone-ap-snmp-options-snmp-v3-user
configuration)
Syntax and Type
ruckus(config -zone-ap-snmp-
options-snmp-v3-user )# auth
Type: Privileged
zone-ap-snmp-
ruckus(config-
options-snmp-v3-user )# no
Type: Privileged
zone-ap-snmp-
ruckus(config-
options-snmp-v3-user)#
notification
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
[ inform | trap ]
lists the related config-zone-ap-snmp-options-snmp-v3-user configura-
Parameters (if any)
notification
notification-target
read
write
Configuration Commands (s - z)
Description
Sets the notification type.
Enable the read privilege.
Enable the write privilege.
Description
Sets SNMPv3 user authentication.
Disables the settings that have
been configured with these
commands.
Enable notification privilege.
zone
402