Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 91

Related Commands
Table 30 lists the related diameter-remote-service configuration commands.
Table 30. Commands related to ruckus (config-diameter-remote-service)
Syntax and Type
config-diameter-remote-
ruckus(
service )# description
Type: Privileged
ruckus( config-diameter-remote-
service )# do
Type: Privileged
config-diameter-remote-
ruckus(
service )# end
Type: Privileged
config-diameter-remote-
ruckus(
service )# exit
Type: Privileged
config-diameter-remote-
ruckus(
service )# help
Type: Privileged
ruckus( config-diameter-remote-
service )# no peer
Type: Privileged
config-diameter-remote-
ruckus(
service )# peer
Type: Privileged
config-diameter-remote-
ruckus(
service )# realm-name
Type: Privileged
config-diameter-remote-
ruckus(
service )# retransmit-count
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<peer name>: Peer
name.
<name>: Realm name
<retransmit-count>:
STA re-transmit count.
Configuration Commands (a - d)
diameter-remote-service
Description
Sets the diameter remote service
description.
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Removes the peer association to
diameter.
Peer association to diameter.
Updates or adds remote realm
name.
Updates or adds the re-transmit
count.
91