Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 43

Related Commands
Table 10 lists the related config-admin-radius configuration commands.
Table 10. Commands related to ruckus(config-admin-radius)
Syntax and Type
ruckus(config-admin-radius)#
backup
Type: Privileged
ruckus(config-admin-radius)# do
Type: Privileged
ruckus(config-admin-radius)# end
Type: Privileged
ruckus(config-admin-radius)# exit
Type: Privileged
ruckus(config-admin-radius)# help
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
ip <ip> - Sets the IP
address of secondary
RADIUS server
port <port>: Sets the port
of secondary RADIUS
server
shared-secret: Sets the
shared secret of
secondary RADIUS server
request-timeout
<seconds> - Sets the
request timeout in
seconds for failover policy
max-retry <number>:
Sets the maximum
number of retries for
failover policy
retry-prilnvl <minutes>:
Sets the reconnect to
primary server in minutes
for failover policy
Configuration Commands (a - d)
Description
Enables RADIUS backup.
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
admin-radius
43