Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 193

ruckus(config-ftp-server)# exit
ruckus(config)#
Related Commands
Table 72 lists the related ftp-server commands.
Table 72. Commands related to ruckus(config-ftp-server)
Syntax and Type
ruckus(config-ftp-server)# do
Type: Privileged
ruckus(config-ftp-server)# enable
Type: Privileged
ruckus(config-ftp-server)# end
Type: Privileged
ruckus(config-ftp-server)# exit
Type: Privileged
ruckus(config-ftp-server)# help
Type: Privileged
ruckus(config-ftp-server)# host
Type: Privileged
ruckus(config-ftp-server)# no
Type: Privileged
ruckus(config-ftp-server)#
password
Type: Privileged
ruckus(config-ftp-server)# port
Type: Privileged
ruckus(config-ftp-server)# protocol
Type: Privileged
ruckus(config-ftp-server)# remote-
directory
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Parameters (if any)
<ip>
<enable>
<password>
<port>
<protocol>
<directory>
Configuration Commands (e - r)
Description
Executes the do command.
Enable for uploading reports to the
FTP server.
Ends the current configuration
session and return to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Sets the FTP server IP address.
Disables uploaded reports to the
FTP server.
Sets the FTP password.
Sets the FTP server port.
Sets the protocol.
Sets the FTP remote directory.
ftp-server
193