Lineman - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

lineman

To setup the workflow URL or to upload the workflow file, use the following
command.
ruckus(config)# lineman workflow-file <ftp-url>
ruckus(config)# lineman workflow-url <ftp-url>
Syntax Description
This command uses the following syntax:
<ftp-url>: Define the FTP URL format
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# lineman workflow-file https://172.19.10.4:8443
localdb-service
To create or update the local database service configuration, use the following
command.
ruckus(config)# localdb-service
Syntax Description
This command has no arguments or keywords.
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# localdb-service
ruckus(config-localdb-service)#
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Configuration Commands (e - r)
lineman
257