Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 319

Table 111. Commands related to ruckus (config-outbound-firewall).
Syntax and Type
outbound-firewall )#
ruckus(config-
ip-rule
Type: Privileged
ruckus(config- outbound-firewall )#
no
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Parameters (if any)
• <profileName> out [
udp | sctp | tcp ] [ sport
| dport ] <port> [ src |
dst ] <ipaddress>
• <profileName>:
profile name
• out: Output traffic
• udp: UDP
• sctp: SCTP
• tcp: TCP
• sport: Source port
• dport: Destination
port
• <port>: port
• src: Source
• dst: Destination
• <ipaddress>: IP
address
<ip-rule><profileName>
Configuration Commands (e - r)
Description
Allow IPtables profile.
Remove IP rule
outbound-firewall
319