Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 34

Table 5. Commands related to ruckus(config-3rd-zone-wlan)
Syntax and Type
ruckus(config-3rd-zone-wlan)# do
Type: Privileged
ruckus(config-3rd-zone-wlan)#
end
Type: Privileged
ruckus(config-3rd-zone-wlan)#
exit
Type: Privileged
ruckus(config-3rd-zone-wlan)#
forwarding-service-profile
Type: Privileged
ruckus(config-3rd-zone-wlan)#
help
Type: Privileged
ruckus(config-3rd-zone-wlan)#
hotspot-profile
Type: Privileged
ruckus(config-3rd-zone-wlan)# no
Type: Privileged
ruckus(config-3rd-zone-wlan)#
vlan-type
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<name>
<name>
access-vlan
acct-server
acct-service-profile
acct-ttg-session
bypass-cna
preserve-all
qinq <s-vlan-id>
Configuration Commands (a - d)
Description
Executes the Executes the do
command.
Ends the current configuration
session and return to privileged
EXEC mode.
Exits from the EXEC.
Sets the core network forwarding
service profile.
Displays the help.
Sets the hotspot service.
Disables or deletes the
configurations that have been set.
Enables dynamic VLAN.
3rd-zone
34