Operator-Profile - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

operator-profile

To create or update WiFi operator profile configuration, use the following command.
ruckus(config)# operator-profile <name>
Syntax Description
This command uses the following syntax:
name: Operator profile name
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# operator-profile orangewifi
ruckus(config-operator-profile)#
Related Commands
Table 109
Table 109. Commands related ruckus(config-operator-profile)
Syntax and Type
ruckus(config-operator-profile)#
description
Type: Privileged
ruckus(config-operator-profile)# do
Type: Privileged
ruckus(config-operator-profile)#
domain-names
Type: Privileged
ruckus(config-operator-profile)#
end
Type: Privileged
ruckus(config-operator-profile)#
exit
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
lists the related operator-profile configuration commands.
Parameters (if any)
<text>
<domain-name>
Configuration Commands (e - r)
Description
Sets the description.
Executes the do command.
Sets the domain name.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
operator-profile
314