Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 241
Hide thumbs
Also See for SmartCell Gateway 200:
- Reference manual (384 pages) ,
- Getting started manual (104 pages) ,
- Administrator's manual (470 pages)
Table of Contents
Advertisement
Related Commands
Table 94
lists the related ipsec-profile configuration commands
Table 94. Commands related to ruckus(config-ipsec-profile).
Syntax and Type
ruckus(config-ipsec-profile)# auth-
type
Type: Privileged
ruckus(config-ipsec-profile)# cara-
server
Type: Privileged
ruckus(config-ipsec-profile)# cara-
server-path
Type: Privileged
ruckus(config-ipsec-profile)# cara-
subject-name
Type: Privileged
ruckus(config-ipsec-profile)# cmp-
dhcp-opt43-subcode
Type: Privileged
ruckus(config-ipsec-profile)# cmp-
subject-name-dhcp-opt43-
subcode
Type: Privileged
ruckus(config-ipsec-profile)#
description
Type: Privileged
ruckus(config-ipsec-profile)#
dhcp-opt43-subcode
Type: Privileged
ruckus(config-ipsec-profile)# do
Type: Privileged
rruckus(config-ipsec-profile)#
dpd-delay
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Parameters (if any)
Configuration Commands (e - r)
Description
Sets the authentication type
Sets Certificate Management
Protocol CA/RA address.
Sets Certificate Management
Protocol Server path.
Sets the Certificate Management
Protocol subject name of CA/RA
Sets the Certificate Management
Protocol DHCP option 43 sub
code for the CA/RA address
Sets the Certificate Management
Protocol DHCP option 43 sub
code for subject name of CA/RA
Sets the description.
Sets the DHCP option 43 sub
code for Security Gateway.
Executes the do command.
Sets the Dead Peer Detection.
ipsec-profile
241
Advertisement
Table of Contents
Need help?
Do you have a question about the SmartCell Gateway 200 and is the answer not in the manual?