Hlr-Mnc-Ndc - Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual

hlr-mnc-ndc

To setup the HLR service MNC to NDC mapping configuration, use the following
command.
ruckus(config)# hlr-mnc-ndc
Syntax Description
This command has no arguments or keywords.
Default
This command has no default settings.
Command Mode
Config
Example
ruckus(config)# hlr-mnc-ndc 345 346 679
Related Commands
Table 76 lists the related hlr-mnc-ndc server configuration commands.
Table 76. Commands related to ruckus(config-hlr-mnc-ndc)
Syntax and Type
ruckus(config-hlr-mnc-ndc)# do
Type: Privileged
ruckus(config-hlr-mnc-ndc)# end
Type: Privileged
ruckus(config-hlr-mnc-ndc)# exit
Type: Privileged
ruckus(config-hlr-mnc-ndc)# help
Type: Privileged
ruckus(config-hlr-mnc-ndc)# mcc
Type: Privileged
ruckus(config-hlr-mnc-ndc)# mnc
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71292-001 Rev A
Parameters (if any)
<mcc>
<mnc>
Configuration Commands (e - r)
Description
Executes the do command.
Ends the current configuration
session and returns to privileged
EXEC mode.
Exits from the EXEC.
Displays the help.
Sets the mobile country code.
Sets the mobile network code.
hlr-mnc-ndc
201