Ruckus Wireless SmartCell Gateway 200 Command Line Interface Reference Manual page 130

Table 41 lists the related domain-zone-ap-group-lldp configuration commands.
Table 41. Commands related to ruckus(config-domain-zone-ap-group lldp)
Syntax and Type
ruckus(config-domain-zone-ap-
group-lldp)# lldp-ad-interval
Type: Privileged
ruckus(config-domain-zone-ap-
group-lldp)# lldp-hold-time
Type: Privileged
ruckus(config-domain-zone-ap-
group-lldp)# lldp-mgmt
Type: Privileged
Table 42 lists the related domain-zone-ap-group-port-setting configuration
commands.
Table 42. Commands related to ruckus(config-domain-zone-ap-group-port-setting)
Syntax and Type
ruckus(config-domain-zone-ap-
group-port-setting)# do
Type: Privileged
ruckus(config-domain-zone-ap-
group-port-setting)# dot1x
Type: Privileged
SCG200, vSZ-H and SZ300 Command Line Interface Reference Guide for SmartZone 3.5.1, 800-71515-001 Rev A
Parameters (if any)
<seconds>
<seconds>
Parameters (if any)
authsvr [ <Authenticator
Server Name> ]
accsvr <name>
mac-auth-bypass [ true |
false ]
supplicant user-name [
<user name> password
<password>
supplicant mac
Configuration Commands (a - d)
Description
Sets the LLDP advertise interval in
seconds from the range 1 to 300.
Sets the LLDP hold time in
seconds from the range 60 to
1200.
Enables the LLDP management IP
TLV.
Description
Executes the do command.
Sets the 802.1x role
domain
130