Chapter 9 Parameter Setting; Parameter Setting Procedure - Mitsubishi Electric MELSEC iQ-R-RD75P4 User Manual

9
PARAMETER SETTING
This chapter describes the parameter setting of the RD75. By setting parameters, the parameter setting by program is not
needed.
The parameter setting has two types including the module parameter and module extension parameter.
9.1

Parameter Setting Procedure

1.
Add the RD75 to the engineering tool.
[Navigation]  [Parameter]  [Module Information]  Right-click  [Add New Module]
2.
The parameter setting has two types including the module parameter and module extension parameter. Select either of
them from the tree on the following window.
[Navigation]  [Parameter]  [Module Information]  Target module
3.
Write the settings to the CPU module with the engineering tool.
[Online]  [Write to PLC]
4.
The settings are reflected by resetting the CPU module or powering off and on the system.
9 PARAMETER SETTING
9.1 Parameter Setting Procedure
9
315