Synchronized Refresh-Dedicated Area - Mitsubishi Electric MELSEC iQ-R-RD75P4 User Manual

12.10

Synchronized Refresh-dedicated Area

[Md.61] Analysis complete flag
This area stores the start preparation complete state in the pre-analysis mode. Only when the RD75 is set as the inter-module
synchronization target module, this area is valid.
Analysis complete flag
Analysis not completed
Analysis completed
In the interpolation control, only the value of the reference axis is changed.
■Buffer memory address
The following table shows the buffer memory address of this area.
Buffer memory name
Analysis complete flag
12 DATA USED FOR POSITIONING CONTROL
486
12.10 Synchronized Refresh-dedicated Area
Stored value
0
1
Axis 1 Axis 2
54000 54001
Axis 3 Axis 4
54002 54003