External I/O Signal Monitor Function - Mitsubishi Electric MELSEC iQ-R-RD75P4 User Manual

8.5

External I/O Signal Monitor Function

External I/O signal monitor function monitors the module information on the engineering tool.
The following shows the information that can be monitored.
• RUN LED, ERR LED
• No. of write accesses to flash ROM (the same information as [Md.19] No. of write accesses to flash ROM)
• External I/O signal (The logics of the external I/O signals are set in [Pr.22] Input signal logic selection and [Pr.23] Output
signal logic selection.)
Operation method
Display [Module Information List] by following the procedure shown below.
[Diagnostics]  [System Monitor]  Double-click RD75  [Module Information List]
8 COMMON FUNCTIONS
8.5 External I/O Signal Monitor Function
8
309