Preface - Siemens SIMATIC ET 200SP F-TM Equipment Manual

Preface

Purpose of the documentation
This equipment manual supplements the ET 200SP System Manual
(https://support.industry.siemens.com/cs/ww/en/view/58649293).
Functions that generally relate to the system are described in this manual.
The information provided in this manual and in the system/function manuals supports you in
commissioning the system.
Conventions
CPU: When the term "CPU" is used in this manual, it applies to the CPUs of the S7-1500
automation system as well as to the CPUs/interface modules of the distributed I/O system
ET 200SP.
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on the section of the documentation to which particular attention
should be paid.
F-TM ServoDrive
Equipment Manual, 02/2020, A5E47579503-AA
3