Adjustment; Steering Friction; Throttle Grip Friction; Remote Control Lever Friction - TOHATSU MFS 40A Owner's Manual

62

ADJUSTMENT

ENOM00073-0

1. Steering friction

Tiller handle type
ENOW00074-1
Do not over tighten the steering friction
lever, it could result in difficult handling of
the outboard motor, resulting in the loss of
control causing an accident and could lead
to severe injury.
Adjust this lever to achieve the desired
steering friction (drag) on the tiller han-
dle. Move lever towards (2) to decrease
friction and move lever towards (3) to
increase friction.
3
9
1. Steering friction lever
2. Decrease
3. Increase
ENOM00074-A

2. Throttle grip friction

ENOW00074-1B
Do not overtighten the throttle adjustment
screw or it could result in difficult handling
of the outboard motor, resulting in the loss
of control causing an accident and could
lead to severe injury.
WARNING
2
ENOF00910-0
WARNING
Friction adjustment of the throttle grip
can be made with the throttle adjust-
ment screw.
1
1. Throttle friction adjustment screw
2. Decrease
3. Increase
ENOM00075-1

3. Remote control lever friction

ENOW00074-1C
1
Do not over tighten the remote control
throttle friction adjustment screw or it
could result in difficult handling of the out-
board motor, resulting in the loss of control
causing an accident and could lead to severe
injury.
To adjust the friction of the remote con-
trol lever, turn the throttle friction
adjustment screw on the front of the
remote control. Turn c lock wise to
increase the friction and counter-clock-
wise to decrease it.
3
2
ENOF00911-1
WARNING