Black Box LPB2910A User Manual page 360

The OSD display will show the IP address of the Media Cento on the attached screen for the Receivers to easily identify which screen
is attached to which receiver. You can set the time that the IP will be displayed.
Figure 9-11. Set time to show OSD on the Hardware screen.
Next, click on the Custom Display option on the Media Controller menu to switch which receivers are connected to which
transmitters. The Units are setup in a grid display. Transmitters are listed across the top and receivers are listed down the side. Just
click the box across from a receiver to attach it to the selected transmitter, then click the switch button to activate.
Figure 9-12. Custom Display screen.
You can also use the grid to setup Presets. Choose your setup, then click the Save as New Preset button. This will open a Name Preset
box. Name the preset and click apply.
Page 348