Black Box LPBG716A User Manual
  1. Manuals
  2. Brands
  3. Black Box Manuals
  4. Switch
  5. LPBG716A
  6. User manual

Black Box LPBG716A User Manual

16-/24-port gigabit poe pse web smart switch with 4 sfp slots
Hide thumbs
Table of Contents

Advertisement

Quick Links

16-/24-Port Gigabit PoE PSE Web Smart Switch with 4 SFP Slots
Bring PoE into your Gigabit network.
Models available with sixteen or twenty-four autosensing,
auto-negotiating 10-/100-/1000-Mbps ports; four are dual-media
ports, which may be used for copper or fiber (SFPs).
LPBG716A
LPBG724A

Advertisement

Table of Contents
loading

Related Manuals for Black Box LPBG716A

Summary of Contents for Black Box LPBG716A

  • Page 1 LPBG716A LPBG724A 16-/24-Port Gigabit PoE PSE Web Smart Switch with 4 SFP Slots Bring PoE into your Gigabit network. Models available with sixteen or twenty-four autosensing, auto-negotiating 10-/100-/1000-Mbps ports; four are dual-media ports, which may be used for copper or fiber (SFPs).
  • Page 2 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Caution Circuit devices are sensitive to static electricity, which can damage their delicate electronics. Dry weather conditions or walking across a carpeted floor may cause you to acquire a static electrical charge. To protect your device, always: ∞Touch the metal chassis of your computer to ground the static electrical charge before you pick up the circuit device.
  • Page 3 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Federal Communications Commission and Industry Canada Radio Frequency Interference Statements This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication.

  • Page 4: Normas Oficiales Mexicanas (Nom) Electrical Safety Statement

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Normas Oficiales Mexicanas (NOM) Electrical Safety Statement INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2.

  • Page 5: European Community (Ce) Electromagnetic Compatibility Directive

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch European Community (CE) Electromagnetic Compatibility Directive This equipment has been tested and found to comply with the protection requirements of European Emission Standard EN55022/EN61000-3 and the Generic European Immunity Standard EN55024. EMC: EN55022 (2003)/CISPR-2 (2002): class A IEC61000-4-2 (2001): 4KV CD, 8KV AD...
  • Page 6 6 UTP/STP Transmission Mode: 10/100/1000Mbps support full or half duplex Transmission Speed: 10/100/1000Mbps for TP Network Interface: LPBG716A: 16-port 10/100/Gigabit with PoE (full power); LPBG724A: 24-port 10/100/Gigabit with PoE (full power); Connectors: LPBG716A: (16) RJ-45 including 4-port combo UTP/SFP Gigabit;...

  • Page 7: Management Software Specifications

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 1.2 Management Software Specifications Port Management: Port Configuration, Port Mirroring, Broadcast Strom Control, PoE On/ Off Setting VLAN Setting: Port-based/Tag-based, VLAN ID: 1–4094K Trunking: 2 groups (1–4 ports for each group) VLAN Function: Port-Base/802.1Q-Tagged, allowed up to 256 active VLANs in one switch QoS Setting: Up to 4 queues Security Filter: MAC address filtering...

  • Page 8: What's Included

    Port-based VLAN Priority queues for QoS 2.2 What’s Included Your package should include the following items. If anything is missing or damaged, please contact Black Box Technical Support at 724-746-5500. (1) 16-Port or 24-Port 10/100/Gigabit PoE PSE Web Smart Switch (1) Mounting Accessory (for 19”...

  • Page 9: Led Indicators

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Rear Panel AC Power Input Figure 2-3. LPBG716A or LPBG724A Rear Panel. 2.4 LED Indicators Figure 2-4. LED Indicators on the LPBG724A. Color Function System LED POWER Green...

  • Page 10: Tp Port And Cable Installation

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 3. Installation 3.1 Hardware and Cable Installation CAUTION: Wear a grounding device to avoid damage from electrostatic discharge. Be sure that the power switch is OFF before you connect the power cord to the power source. 3.1.1 TP Port and Cable Installation 1.
  • Page 11 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch SFP transceiver module Figure 3-1. 3.1.3 Power On The switch supports a 100–240 VAC, 50–60 Hz power supply. The power supply will automatically convert the local AC power source to DC power. It does not matter whether or not any connection is plugged into the switch when powering on. After the power is on, all LED indicators will light up and then all will turn off, except for the power LED, which stays on.

  • Page 12: Cabling Requirement

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 3-2 Install the switch chassis in a 19"rack 3.3 Cabling Requirement For successful installation and good network performance, use CAT5, CAT5e, or higher cable. If you use non-compliant cables, the LAN will work poorly.

  • Page 13: Set Ip Address, Subnet Mask, And Default Gateway Ip Address

    For example, suppose your network address is 10.1.1.0, and subnet mask is 255.255.255.0. You can change the switch’s default IP address 192.168.2.1 to 10.1.1.1 and set the subnet mask to be 255.255.255.0. Then, choose your default gateway, for example, 10.1.1.254. Default Value LPBG716A/LPBG724A Your Network Setting IP Address 192.168.2.1 10.1.1.1...
  • Page 14 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 3-5. Login Screen for Web. Page 14 724-746-5500 l www.blackbox.com...

  • Page 15: Web-Based Management Operation

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4. Web-based Management Operation This chapter instructs you how to configure and manage the switch through the Web user interface it supports. You can access and monitor the switch’s status, including port activity, spanning tree status, port aggregation status, VLAN, and priority status and so on from any one port on the switch.

  • Page 16: Web Management Home Overview

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.1 Web Management Home Overview After you login, you can select one of the configurations by clicking the icon in the configuration bar. There are four major categories for your configuration. Configuration Monitoring Maintenance...
  • Page 17 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.2.2 Ports You can enable or disable Jumbo Frames by clicking it in the check box. Select the “Port no.” that you want to configure for the mode below: - Auto speed - enable/disable the port - 10M/100M/1000M...
  • Page 18 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-4. VLAN configuration. 4.2.4 Aggregation Set up port trunk groups and then click the port number you want to include in the same group. Choose from eight groups. The maximum for one group is 24 ports. Figure 4-5.
  • Page 19 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-6. LACP Port configuration. 4.2.6 RSTP To enable/disable the protocol for a port, select the port number. 724-746-5500 l www.blackbox.com Page 19...
  • Page 20 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-7 RSTP configuration 4.2.7 802.1x Select the “Port no.” that you want to configure for the mode below: - Auto - Force Authorized - Force Unauthorized Figure 4-8. 802.1x configuration. Page 20 724-746-5500 l www.blackbox.com...
  • Page 21 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.2.8 IGMP You can enable or disable IGMP by clicking the checking box. Select the “Port no.” for which you want to configure the mode. Figure 4-9. IGMP configuration. 4.2.9 Mirroring Port Mirroring mirrors the traffic from the Source port to the Destination port.

  • Page 22: Quality Of Service

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.2.10 Quality of Service You can enable or disable QoS by clicking the checkbox. If you enable QoS, you can select the class of service for each port. Figure 4-11.

  • Page 23: Rate Limit

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.2.12 Rate Limit Select the “Port no.” for which you want to configure the speed. Figure 4-13. Rate Limit configuration. 724-746-5500 l www.blackbox.com Page 23...

  • Page 24: Storm Control

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.2.13 Storm Control You can set up storm control by configuring the modes. Figure 4-14. Storm Control configuration. Page 24 724-746-5500 l www.blackbox.com...
  • Page 25 16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.3 Monitoring 4.3.1 Statistics Overview The screen below shows statistics for all ports. Figure 4-15. Statistics Overview for all ports. 4.3.2 Detail Statistics For detailed statistics of each port, click the port number. Figure 4-16.

  • Page 26: Lacp Status

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.3.3 LACP Status The screen below shows the LACP status for LACP ports. Figure 4-17. LACP Aggregation overview. 4.3.4 RSTP Status The screen below shows RSTP status for RSTP ports. Figure 4-18.

  • Page 27: Igmp Status

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch 4.3.5 IGMP Status The screen below shows IGMP status for IGMP ports. Figure 4-19. IGMP Status. 4.3.6 VeriPHY Click the port number(s) and the mode to see VeriPHY cable status for a port(s). Figure 4-20 VeriPHY Cable Diagnostics 4.3.7 Ping Choose the mode to select the target IP address.

  • Page 28: Factory Default

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-21. Ping Parameters. 4.4 Maintenance 4.4.1 Warm Restart You can select yes/no to do the warm restart, and then the new settings will change according to your selection. Figure 4-22.

  • Page 29: Configuration File Transfer

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-24. Software Upload. 4.4.4 Configuration File Transfer Follow the instructions on the screen to upload and download the configuration. Figure 4-25. Configuration Upload and Download. 4.4.5 PoE Remotely access and monitor the attached PD (Powered Device) status by using the Enable/Disable function.

  • Page 30: Forgot Password

    16/24 Port Gigabit PoE PSE With 4 SFP Slots Web Smart Switch Figure 4-26. PoE. 4.4.6 Logout Click “Logout” to logout of the switch. 4.4.7 Forgot Password If you forgot your IP or password, use the reset button for the factory default setting first. Then take the following steps to reset the Web Smart Switch back to the original default: Step 1: Turn on the Web Smart Switch.
  • Page 31 LPBG716A, rev. 1 ______________________________________________________________________ 724-746-5500 l www.blackbox.com...

This manual is also suitable for:

Lpbg724a

Table of Contents