Samsung S3F84B8 User Manual page 244

S3F84B8_UM_REV 1.00
Timer 0 operation mode selection bit
0 = Two 8-bit timers mode (Timer C/D)
1 = One 16-bit timer mode (Timer 0)
Timer C clock source selection bit
0 = Internal clock source
1 = CMP0 output
Timer C Control Register (TCCON)
E5H, Set1, Bank1, Reset = 00H, R/W
MSB .7 .6
Not used
Timer C counter clear bit:
0 = No effect
1 = Clear Timer A counter
(after clearing, return to zero)
Timer C start/stop bit:
0 = Stop Timer C
1 = Start Timer C
Figure 12-1
Timer C Prescaler Register (TCPS)
MSB .7 .6
Not used for S3F84B8
Pre-scalar values(TCPSB) above 12 are invalid
NOTE:
Figure 12-2
.5 .4 .3 .2
Not used
Timer C Match interrupt enable bit:
0 = Disable Interupt
1 = Enable interrupt
Timer 0 Control Register (TCCON)
E6H, Set1, Bank1, R/W
.5 .4 .3
Timer C prescaler bit (TCPSB)
TC CLK = fxx/(2^TCPSB)
Timer 0 Prescaler Register (TCPS)
12-3
.1 .0 LSB
Not used
Timer C Match interrupt pending bit:
0 = No interrupt pending
(clear pending bit when write)
Reset Value: 00h
.2 .1 .0 LSB
12 TIMER 0