Rp/Srp0/Srp1 — Set Register Pointer - Samsung S3F84B8 User Manual

S3F84B8_UM_REV 1.00
6.3.66 RP/SRP0/SRP1 — SET REGISTER POINTER
src
SRP
src
SRP0
src
SRP1
If src (1) = 1 and src (0) = 0 then:
Operation:
If src (1) = 0 and src (0) = 1 then:
If src (1) = 0 and src (0) = 0 then:
The source data bits one and zero (LSB) determine whether to write one or both of the register
pointers, RP0 and RP1. Bits 3–7 of the selected register pointer are written, except when both
register pointers are selected. RP0.3 is then cleared to logic zero and RP1.3 is set to logic one.
No flags are affected.
Flags:
Format:
opc
The statement SRP #40H sets register pointer 0 (RP0) at location 0D6H to 40H and register
Examples:
pointer 1 (RP1) at location 0D7H to 48H.
The statement "SRP0 #50H" sets RP0 to 50H, and the statement "SRP1 #68H" sets RP1 to
68H.
src
RP0 (3–7)
RP1 (3–7)
RP0 (4–7)
RP0 (3) 0
RP1 (4–7)
RP1 (3) 1
Bytes Cycles
2
6-78
6 INSTRUCTION SET
src (3–7)
src (3–7)
src (4–7),
src (4–7),
Opcode Addr Mode
(Hex)
4 31
src
IM