Table of Contents
Advertisement
D Horn Volume function
1.
Open the "Horn Volume" screen.
[MENU] > Horn > Horn Volume
2.
Push [◄] or [►], or rotate [CH/ENT] to adjust the
foghorn level.
D Manual Horn function
1.
Open the "Manual Horn" screen.
[MENU] > Horn > Manual Horn
Horn
2.
Hold down
• While holding down Horn , the horn sounds, and the
screen shown on the right is displayed.
L To adjust the horn volume level, push VOL to open
the Horn Volume popup screen.
NOTE: While in the Horn mode, the transmit and
receive functions are disabled. When the transceiver is
transmitting, the Horn function is disabled.
D Frequency setting
1.
Open the Frequency.
[MENU] > Horn > Frequency
2.
Select the foghorn's audio frequency.
L Available frequency range is 200 Hz to 700 Hz in 50 Hz
steps.
■ Using the Voice Scrambler
The Voice Scrambler provides private communications. In order to receive or send
scrambled transmissions, you must activate the scrambler function. You also need to set
the scrambler code on the Menu screen. (p. 85)
L The scrambler function automatically turns OFF when Channel 16 or 70 is selected.
1.
Select an operating channel other than Channel 16, 70 or the weather channels.
Voice SBL
2.
Push
to turn the Voice Scrambler ON or OFF.
• The "SBL" icon is displayed when the voice scrambler
is ON.
D Setting scrambler codes
Set the code to between 1 and 32 on the Menu screen. In order to understand each other,
all transceivers in your group must use the same scramble code.
to sound a horn.
OTHER FUNCTIONS
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
76
Advertisement
Table of Contents
