D Program; Using The Voice Recorder; D Playback The Recorded Voice - Icom IC-M803 Instruction Manual

D Program

The Program scan searches the selected channel
it in t e re uenc range set
setting an t e n re uenc
Ra io Settings
Program Scan R
Start Frequency
Ra io Settings
Program Scan R
End Frequency
Start
re uenc
o use t e Program scan select Program on t e
enu screen (p� 65)
Ra io Settings
1� Rotate GRP C to select a c annel (p� 12)
2� Pus or until
Software Key area�
to turn
3� Push
4� Pus or until
Software Key area�
5� Push to start a scan�
6� Push again to stop the scan�
t e Start re uenc
setting (p� 66)
Scan
Scan
End
re uenc
Scan
Type
is displayed in the
t e S uelc unction
is displayed in the
R C S
I Using the Voice Recorder
The transceiver has an automatic recording function
that can record the last 120 seconds of the receiving
audio� You can playback the audio that you could not
hear clearly�
z Starts recording automatically when the signal is
received�
is displayed when recording the received audio�
•
• Stops recording 3 seconds after the signal disappears,
or when the channel is changed�
is displayed when recording is stopped�
•
• The recorded voice data is erased when the
transcei er is turne

D Playback the recorded voice

ou can set t e pla start point in Pla
e ore pla ing (p )
1� Pus or until
Software Key area�
2� Push to play the recorded audio�
• Playing the recorded audio is automatically started�
• The play window is displayed as shown below�
TIP:
• To stop playing the recorded audio, push [CH/
GRP
L Pus C GRP again to restart pla ing
• Rotate C GRP to a ust t e pla start point
L Set between -2'00 to 0'00�
• Rotate to a ust t e olume le el
L Set to et een (
• is displayed when playing the recorded
audio�
• is displayed when playing the recorded
audio is stopped�
• When the play window is displayed, recording
the received audio is stopped�
6
P R S
ime setting
is displayed in the
) an
6