Changing The Qso Recorder Settings - Icom ID-52A Advanced Manual

8
RECORDER FUNCTION

Changing the QSO recorder settings

You can change the recording settings�
See pages 8-15 and 8-16 for details�
Continue to record, even while the squelch is
closed
[MENU] > RECORD > QSO Recorder >
Recorder Set > RX REC Condition
L The default setting is "Squelch Auto" (Records only while
the squelch is open)�
Record the QSO audio as one file
[MENU] > RECORD > QSO Recorder >
Recorder Set > File Split
L The default setting is "ON" (transmit and receive audio
are separately recorded in different files)�
L When "RX REC Condition" is set to "Squelch Auto," an
audio file is created every time the squelch opens� The
received audio is recorded in a separated file�
Separately start or stop recording on the selected
band (MAIN band)
[MENU] > RECORD > QSO Recorder >
Recorder Set > REC Operation
L The default setting is "A/B Link" (recording simultaneously
starts on the MAIN and SUB bands)�
Synchronize the recording to PTT
[MENU] > RECORD > QSO Recorder >
Recorder Set > PTT Auto REC
L The default setting is "ON" (Recording is synchronized to
PTT)�
TIP: When "PTT Auto REC" is set to "ON"
• Starts recording not only when [PTT] is pushed, but also
when switched to transmit by a speaker microphone
or a Bluetooth headset, by a CI-V command, or by the
VOX function�
• A signal that is received within 10 seconds after the
squelch is closed is recorded in the same file�
Change the Skip Time
[MENU] > RECORD > QSO Recorder >
Player Set > Skip Time
L The default setting is "10sec�"
8-4