Optional Modules Supported By Front Panel; Rear Panel - Huawei Quidway S3000-EI Series Installation Manual

Installation Manual
Quidway S3000-EI Series Ethernet Switches
II. Fixed 100M Ethernet port on the front panel
Table 1-12 Attributes of the fixed 100M Ethernet port of S3026E F Switch
Attribute
Connector
Interface number
Operating mode
Transmission
medium and
maximum
transmission distance
III. Console port
S3026E F Switch provides a Console port compliant with EIA/TIA-232 asynchronous
serial criterion. Users can perform local or remote configuration of the switches via
this port.
Table 1-13 Console port attributes
Attribute
Connector
Standard of
interface
Baud rate
Services supported

1.5.2 Optional Modules Supported by Front Panel

6-port 100Base-FX Multi-mode module
6-port 100Base-FX Single Mode module
6-Port 10Base-T/100Base-TX Module

1.5.3 Rear Panel

I. S3026E FM and S3026E FS Switches Rear Panel
Rear panel layouts
You can find AC socket, grounding screw, and redundant power socket on the rear
panel of S3026E FM and S3026E FS Switches. See the figure below.
S3026E FM
LC
12
100M
Full duplex
62.5/125µm Multi-mode optical fiber
with a maximum transmission
distance of 2km.
RJ-45
Asynchronous EI_A/TIA-232
9600bps (by default)
Connect with character terminal
Connect with the serial port of a local terminal (which can be a PC) or a remote
terminal (through a pair of Modems) and run terminal emulation program on a
terminal.
1-11
Chapter 1 Product Introduction
S3026E FS
9/125µm Single Mode optical fiber with a
maximum transmission distance of 15km.
Description