Configuring Custom Access Types; Creating A Custom Access Type - Avaya P580 User Manual Addendum

Configuring Custom Access Types

Creating a Custom Access Type

Web Agent
Procedure
Part No. 610-0211-094
This section contains procedures for the following tasks:
Creating a Custom Access Type
Viewing Custom Access Types
Modifying a Custom Access Type
* Note: To log in to the ATM Uplink module, a user must:
• Have read-write access to the Modules and Ports
Management features.
• Enter Privileged mode or Global Configuration mode to
enter the session <slot number> command.
In earlier versions of application software, you could log
in to the ATM Uplink module from User mode. This
change in functionality prevents unauthorized users from
logging in to the ATM Uplink module.
To create a custom access type:
1. In the navigation pane, expand the System >
Administration folders, and then click Custom Access
Types.
The Custom Access Types Web page is displayed in the
content pane. See
on page 9
on page 13
on page 14
Figure 4.
December 2, 2002
Doc. No. 650-100-701
9