Deleting OSPF Summaries
Deleting OSPF
Summaries
Using the Web
Agent
Deleting OSPF
Summaries
Using the CLI
Modifying OSPF Summaries
Modifying OSPF
Summaries
Using the Web
Agent
Cajun P550/P880/P882 Switch User Guide
You can delete OSPF summaries from either the web agent or the
CLI.
To delete an OSPF summary using the web agent:
1. Select Summaries from the Routing > IP > OSPF group on the
web agent window. The OSPF Summaries dialog box opens
(Figure 11-7).
2. Select the OSPF summary that you want to remove.
3. Click DELETE. The OSPF summary you selected is removed.
To delete an OSPF summary using the CLI, enter the following
command from Configure mode:
cajun(configure router: ospf)# [no] area
<area-id> range <ip-address> <mask>
Refer to the Cajun™ P550™/P880/P882 Command Line Interface
Reference Guide for Version 5.0 for details about this command.
You can modify an OSPF summary using wither the web agent or
the CLI.
To modify an OSPF summary using the web agent:
1. Select Summaries from the Routing > IP > OSPF group on the
web agent window. The OSPF Summaries dialog box opens
(Figure 11-7).
2. Select the OSPF summary to be modified.
3. Refer to Table 11-5 to configure the OSPF Summaries dialog
box parameters.
4. Click APPLY to save your changes, or CANCEL to restore
previous settings.
Configuring the OSPF Routing Protocol
11-15