Set Commands Summary Table - Avaya P334T-ML User Manual

Set Commands Summary Table

Following is a Table of the Privileged Level set commands.
• set logout
• set timezone
• set time protocol
• set time server
• set time client
• set ip route
• set snmp community
• set snmp trap
• set snmp trap auth
• set snmp retries
• set snmp timeout
• set system location
• set system name
• set system contact
• set device-mode
• set interface
• set interface ppp
• set port level
• set port negotiation
• set port enable
Avaya P334T-ML User's Guidee
Sets the number of minutes before an
inactive CLI session automatically logs
out.
Sets the timezone for the system.
Sets the time protocol for use in the
system.
Sets the NTP server address.
Enables or disables the time client.
Adds IP addresses to the IP routing
table.
Sets the SNMP community string for a
specific switch.
Sets the SNMP trap of the system or
add/delete an entry into/from the
SNMP trap receiver table.
Enables/disables the SNMP
authentication trap.
Sets the number of SNMP retries.
Sets the SNMP timeout.
Sets the system location.
Sets the system name.
Sets the system contact person.
Sets the basic mode of operation.
Configures the management interface of
the device.
Configures the device ppp interface.
Sets the priority level of a port.
Sets the auto negotiation mode of a port.
Administratively enables a port.
Chapter 6 CLI – Layer 2
Page 102
Page 103
Page 103
Page 103
Page 104
Page 104
Page 105
Page 105
Page 106
Page 106
Page 106
Page 107
Page 107
Page 107
Page 107
Page 108
Page
109
Page 110
Page 110
Page 111
99