Set Eapol Request Packet - Avaya 5000 Series Troubleshooting Manual

Troubleshooting authentication
Procedure
1. Use the eapol multihost eap-mac-max command to set the mac-max
2. Observe no errors after execution.

Set EAPOL request packet

Change the request packet generation to unicast.
Task flow: Set EAPOL request packet
The following task flow assists you to set the EAPOL request packet for unicast.
Figure 36: Set EAPOL request packet
Setting EAPOL request packet globally
About this task
Globally change the EAPOL request packet from multicast to unicast.
84 Troubleshooting
value.
Comments? infodev@avaya.com
December 2013