Table of Contents
Advertisement
Example:
P330-N# set logging server enable 149.49.35.21
Done!
set logging server facility
User level: privileged, supervisor.
Use the set logging server facility command to update the server facility
used for sending messages to Syslog server. Facility settings are done on per Syslog
server.
You need to define a logging server using the set logging server
command before you can set the server facility.
The syntax for this command is:
set logging server facility <server-facility> <ip-address>
server-facility
ip-address
Avaya P330-ML Reference Guide
Chapter 2
The facility used for sending messages to the Syslog server.
Possible values are:
• kern – Kernel
• user – User processes
• mail – Electronic mail
• daemon – Background system processes
• auth – Authorization
• syslog – System logger
• lpr – Printer
• news – Usenet news
• uucp – Unix-to-Unix copy program
• clkd – Clock daemon
• sec – Security
• ftpd – FTP daemon
• ntp – NTP subsystem
• audi – Log audit
• alert – Log alert
• clkd2 – Clock daemon
• local0-local7 – Available for user defined facilities
The IP address of the Syslog server.
Avaya P330-ML Layer 2 CLI Commands
79
Advertisement
Table of Contents
