System-View - HP Enterprise FlexFabric 12900E Series Command Reference Manual

The following are the default settings for the
•
Pausing between screens of output.
•
Displaying up to 24 lines on a screen.
Views
User view
Predefined user roles
network-admin
Usage guidelines
If you disable pausing between screens of output, all output is displayed. The screen is refreshed
continuously until the final screen is displayed.
This command takes effect only for the current CLI session. When you are logged out, the default is
restored.
Examples
# Disable pausing between screens of output for the current CLI session.
<Sysname> screen-length disable
Related commands
screen-length

system-view

Use
system-view
Syntax
system-view
Views
User view
Predefined user roles
network-admin
network-operator
Examples
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
to enter system view from user view.
command:
screen-length
14