Display Mpls Ldp Peer - HP FlexFabric 12500 Command Reference Manual

Field
Protocol Version
Nonstop Routing
Graceful Restart
Reconnect Time
Forwarding State Hold Time
Instance Parameters
Instance ID
Instance State
LSR ID
Loop Detection
Hop Count Limit
Path Vector Limit
Label Retention Mode
IGP Sync Delay
IGP Sync Delay on Restart

display mpls ldp peer

Use display mpls ldp peer to display LDP peer and session information.
Syntax
display mpls ldp peer [ vpn-instance vpn-instance-name ] [ peer-lsr-id ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Description
LDP protocol version.
Whether the nonstop routing function is enabled.
•
On—Enabled.
•
Off—Disabled.
Whether the GR function is enabled.
•
On—Enabled.
•
Off—Disabled.
Value of the Reconnect timer, in seconds.
Value of the MPLS Forwarding State Holding timer, in seconds.
Running parameters for a specific VPN instance or public network.
VPN instance ID. For the public network, this field displays 0.
LDP status in the VPN instance, Active or Inactive.
LSR ID of the local device.
Whether loop detection is enabled.
•
On—Enabled.
•
Off—Disabled.
Hop count limit specified for loop detection.
Path Vector length limit specified for loop detection.
The device supports only the Liberal mode.
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event.
Delay time (in seconds) that LDP must wait before it notifies IGP of an
LDP session-up event in case of LDP restart.
36