Table 4- -3: Tools Required For Module Removal - Tektronix DSA8200 Service Manual

Removal and Installation Procedures
4- - 8
Equipment Required. Most modules in this instrument can be removed with a
screwdriver handle mounted with a size T-15, Torx
tool whenever a procedure step instructs you to remove or install a screw unless
a different size screwdriver is specified in that step. All equipment required to
remove and reinstall each module is listed in the first step of its procedure.
Table 4- - 3: Tools required for module removal
Item
No. Name
1 Screwdriver handle
2 Screwdriver handle, ex-
tended length, 10.5 to
12 inches
3 T-10 Torx tip
4 T-15 Torx tip
5 T-20 Torx tip
3
6 /
inch socket tip
16
1
7 / inch flat-bladed screw-
8
driver
8 #0 phillips screwdriver
9 Angle-Tip Tweezers
3
10 /
inch open-end wrench
16
5
11 /
inch open-end wrench
16
12 Coaxial cable connector
tool
DSA8200 Digital Serial Analyzer and Modules Service Manual
screwdriver tip. Use this
Description
Accepts Torx -driver bits
Accepts Torx -driver bits and
socket tip. Used for removing the
3
/
T-10 screws and inch hex posts
16
from the electrical and optical module
slots.
Used for removing the electrical or
optical module chassis. Torx -driver
bit for T-10 size screw heads.
Used for removing most the instru-
ment's screws. Torx -driver bit for
T-15 size screw heads.
Used for removing the handle
hardware. Torx -driver bit for T-20
size screw heads.
3
/
Used for removing the inch hex
16
posts from the electrical and optical
module slots.
Screwdriver for unlocking cable
connectors.
Screwdriver for removing small
phillips screws, CD & hard drive.
Used to remove front panel knobs
Used to remove the rear panel nut
posts.
Used to remove the rear panel nut
posts.
Used to remove coaxial connectors
from d-subminiature connector
housings.
Part number
General Tool:
620-440
3
/ Standard tool or
16
Xcelite 99X10V
N/S#48706
General Tool:
640-235
General Tool:
640-247
General Tool:
640-250
Standard tool
Standard tool
Standard tool
Standard tool
Standard tool
Standard tool
Amp: 58095-1