Tektronix DSA8200 Service Manual page 43

Digital serial analyzer and modules
Hide thumbs Also See for DSA8200:
Table of Contents

Advertisement

80C05 Optical Sampling
Module
80C06 Optical Sampling
Module
80C07 Optical Sampling
Module
80C07B Optical Sampling
Module
DSA8200 Digital Serial Analyzer and Modules Service Manual
during the calibration such that the combined system will have an OC192
(STM-64) or 10.66 Gb Reference Receiver response.
20 GHz: The sampler bandwidth and response is set during the calibration
such that the combined system will have an Optical Bandwidth (- -6 dB)
>20 GHz.
30 GHz: The sampler bandwidth and response is set during the calibration
such that the combined system will have an Optical Bandwidth (- -6 dB)
>28 GHz.
The 80C04 can be optionally configured with clock recovery (Opt. CR-1) that
supports 9.953 Gb/s telecom standards.
The 80C05 module is designed to test long wavelength (1520- -1580 nm) signals.
This module is intended to be used as a test and measurement tool for high
bandwidth telecommunications with its high optical bandwidth >40 GHz.
OC192: There is one Reference Receiver setup selectable for 9.95328 Gb/s
SONET/SDH standard.
There is no clock recovery option available.
The 80C06 module is designed to test long wavelength (1520- -1580 nm) signals.
This module is intended to be used as a test and measurement tool for high
bandwidth telecommunications with its high optical bandwidth >55 GHz.
55 GHz: There is only a single bandwidth selection available, no Reference
Receiver setups selectable.
There is no clock recovery option available.
The 80C07 module is designed to test both long and short wavelength
(700- -1650 nm) signals. This module is intended to be used as a test and
measurement tool for high bandwidth telecommunications with its high optical
bandwidth >2.3 GHz.
Filtered rates are OC-3, OC-12; unfiltered rate is OC-48.
There is clock recovery option available (155/622/2488 Multi-rate)
The 80C07B module is designed to test both long and short wavelength
(700- -1650 nm) signals. This module is intended to be used as a test and
measurement tool for high bandwidth telecommunications with its high optical
bandwidth >2.3 GHz.
Theory of Operation
2- 9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DSA8200 and is the answer not in the manual?

Questions and answers

Table of Contents