Display Link-Aggregation Member-Port - HP 12500 Series Command Reference Manual

Field
MPLS traffic : mpls-label1,
mpls-label2,
destination-mac address, source-mac
address

display link-aggregation member-port

Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports.
Syntax
display link-aggregation member-port [ interface-list ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number [ to interface-type interface-number ], where interface-type interface-number
specifies an interface by its type and number.
Usage guidelines
For a member port in a static aggregation group, which is unaware of information about the peer
group, this command displays the port number, port priority, and operational key of the local end
only.
Examples
# Display detailed link aggregation information for GigabitEthernet 3/0/1, which is a member port
of a static aggregation group.
<Sysname> display link-aggregation member-port GigabitEthernet 3/0/1
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
GigabitEthernet3/0/1:
Aggregate Interface: Bridge-Aggregation1
Port Number: 1
Port Priority: 32768
Oper-Key: 1
Description
Default link-aggregation load sharing criteria for MPLS traffic. In
this sample output, the criteria are the Layer 1 through Layer 3
mpls-label3
MPLS labels of packets.
User-configured link-aggregation load sharing criteria. In this
sample output, the criteria are the source and destination MAC
addresses of packets.
20