Display Link-Aggregation Member-Port - HP A5830 Series Command Reference Manual

Field
Bridge-Aggregation10 Load-
Sharing Mode
Route-Aggregation10 Load-
Sharing Mode
Layer 2 traffic: destination-mac
address, source-mac address
Layer 3 traffic: destination-ip
address, source-ip address
destination-mac address, source-
mac address

display link-aggregation member-port

Description
Use the display link-aggregation member-port command to display detailed link aggregation information
for the specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Only the port number and operational key of a member port in a static aggregation group are displayed,
because the aggregation group is not aware of the partner's information.
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include } regular-expression
]
View
Any view
Default level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type interface-
number [ to interface-type interface-number ], where interface-type interface-number indicates the port
type and port number.
Description
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
By default, the global link-aggregation load sharing criteria are
displayed.
If you have configured link-aggregation load sharing criteria especially
for this aggregation group, the configured ones are displayed.
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
By default, the global link-aggregation load sharing criteria are
displayed.
If you have configured link-aggregation load sharing criteria especially
for this aggregation group, the configured ones are displayed.
Default link-aggregation load sharing criteria for Layer 2 traffic. In this
sample output, the criteria are the source and destination MAC
addresses of packets.
Default link-aggregation load sharing criteria for Layer 3 traffic. In this
sample output, the criteria are the source and destination IP addresses
of packets.
User-configured link-aggregation load sharing criteria. In this sample
output, the criteria are the source and destination MAC addresses of
packets.
69