Table of Contents
Advertisement
Examples
# Enable MVRP globally.
<Sysname> system-view
[Sysname] mvrp global enable
Related commands
display mvrp running-status
mvrp gvrp-compliance enable
Use mvrp gvrp-compliance enable to enable GVRP compatibility.
Use undo mvrp gvrp-compliance enable to restore the default.
Syntax
mvrp gvrp-compliance enable
undo mvrp gvrp-compliance enable
Default
GVRP compatibility is disabled.
Views
System view
Predefined user roles
network-admin
Usage guidelines
When you enable GVRP compatibility, the device can receive and send both MVRP and GVRP
frames.
Examples
# Enable GVRP compatibility.
<Sysname> system-view
[Sysname] mvrp gvrp-compliance enable
Related commands
display mvrp running-status
mvrp registration
Use mvrp registration to set the MVRP registration mode on a port.
Use undo mvrp registration to restore the default.
Syntax
mvrp registration { fixed | forbidden | normal }
undo mvrp registration
Default
The MVRP registration mode is normal.
Views
Layer 2 Ethernet interface view, Layer 2 aggregate interface view
239
Advertisement
Table of Contents
