Common Items For All Touch Keys - Mitsubishi Electric F930GOT-BWD-E User Manual

Graphic Operation Terminal F930GOT
11.5.1

Common items for all touch keys

This paragraph describes the common contents shared by each function assigned to touch
keys.
1) Size
• A touch key can be set in the unit of dot. When more than a half of a mesh is set as a touch
key, the mesh is recognized as the touch key.
Specified
touch key
area
1) Display changeover
Key : When a specified position is touched, the display frame, the text and the color can be
changed.
Bit : When a specified bit device becomes ON or OFF, the display frame, the text and the
color can be changed.
2) Figure
• Select whether or not the area specified as the touch key is enclosed with a frame.
• Select "No frame" or select one among the following five frames.
Frame
shape
No frame
• By turning on/off the touch switch, the displayed figure and color can be specified.
Touch key
15 meshes (240 dots)
This mesh does not function as the touch key because only less than a half of
this mesh is specified as the touch key.
This mesh functions as the touch key because more than a half of this mesh is
specified as the touch key.
Shaded
Creation of Display Screen (SWo o o o D5C-GOTRE-PACK) 11
•The entire screen is divided into "meshes"
as shown on the left. The touch key
area can be specified in the unit of
mesh.
•The entire screen consists of 15 W x 4 H
meshes. One mesh consists of 16 x 20
dots.
•Broken lines are not actually displayed on
the screen.
Double frame Double frame
(keyboard) (trimming)
Double frame Double frame
(shaded) (bold)
11-25